Email: electroxbd@gmail.com
Whatsapp: 01600334238
Sale!

1.8 Inch TFT LCD Display128x160 V1.1 ST7735

Original price was: ৳ 580.Current price is: ৳ 550.

  1. Display Size: 1.8 inches
  2. Resolution: 128 × 160 pixels.
  3. Display Controller: ST7735 / ST7735S-compatible controller.
  4. Communication Interface: 4-wire SPI.
  5. Display Colors: Commonly 65K colors using RGB565 color mode.

2 in stock

Sale!

1.8 Inch TFT LCD Display 128×160 V1.1 ST7735 Price in Bangladesh

The 1.8 Inch TFT LCD Display 128×160 V1.1 ST7735 is a compact graphical display module designed to bring colorful visual interfaces to embedded electronics and microcontroller projects. Unlike basic character LCD modules that are limited to displaying predefined characters and simple text, this TFT screen can display colorful text, graphics, icons, shapes, diagrams, and custom user interfaces.

With a 128 × 160 pixel resolution and an ST7735 display controller, this module is suitable for projects where a small, lightweight, and versatile color screen is required. Its SPI communication interface allows it to communicate with popular development boards such as Arduino, ESP32, STM32, and Raspberry Pi using a relatively small number of GPIO pins.

The display is particularly useful for building handheld electronic devices, portable monitoring systems, digital instruments, DIY gaming devices, smart control panels, and IoT interfaces. Developers can display real-time sensor measurements, battery information, temperature readings, operating status, menus, and other graphical information.

The V1.1 designation identifies a particular board revision. However, PCB layout, additional features, power circuitry, and pin arrangements can vary between manufacturers. Always check the markings on the actual module before making connections.

What Is an ST7735 TFT Display?

ST7735 is a display controller IC designed to control small color TFT LCD panels. It manages the communication between a microcontroller and the display pixels, allowing a development board to send commands and image data through a serial interface.

The controller receives display instructions through SPI communication and updates the screen accordingly. It supports graphical operations such as drawing pixels, lines, rectangles, circles, text, and images when used with a suitable software library.

The ST7735 controller is widely supported by Arduino and embedded development libraries, making it a convenient choice for electronics enthusiasts, students, and developers.

Key Features of the 1.8 Inch TFT LCD Display

1. Compact 1.8-Inch Display Size

The compact screen is suitable for portable electronics, small control panels, handheld devices, and embedded systems. Its size provides enough display area for basic graphical interfaces without requiring a large enclosure.

2. 128 × 160 Pixel Resolution

With 128 × 160 pixels, the display can present text, numerical information, icons, simple charts, and graphical elements. It offers more flexible presentation options than a traditional 16×2 character LCD.

3. Full-Color Display Capability

The ST7735 controller commonly supports 16-bit RGB565 color data, providing up to 65,536 colors. This makes it possible to create colorful interfaces, highlight important information, and display simple images.

4. SPI Communication Interface

The Serial Peripheral Interface reduces the number of microcontroller pins required for communication. It uses clock, data, chip-select, and data/command signals, along with reset and backlight connections where provided.

5. ST7735 Controller Compatibility

The ST7735 controller is supported by popular libraries such as Adafruit_ST7735, Adafruit_GFX, and TFT_eSPI. These libraries provide functions for drawing shapes, printing text, displaying bitmap images, and creating graphical interfaces.

6. Suitable for Multiple Development Platforms

The module can be integrated into Arduino, ESP32, STM32, Raspberry Pi, and other SPI-capable development platforms. The exact wiring and software configuration depend on the selected controller board and display revision.

7. Built-In LED Backlight

The TFT panel uses an LED backlight to make the display visible. The backlight connection may be controlled directly or through a GPIO/PWM signal, depending on the board design.

Technical Specifications

Parameter Specification
Product Type TFT LCD Display Module
Display Size 1.8 inches
Resolution 128 × 160 pixels
Display Technology TFT LCD
Display Controller ST7735 / ST7735S-compatible
Communication SPI
Color Mode RGB565
Color Capability Up to 65,536 colors
Backlight LED
Power Supply 3.3V or 3.3–5V depending on board revision
Logic Voltage Typically 3.3V
Compatible Platforms Arduino, ESP32, STM32, Raspberry Pi
Display Orientation Configurable through software
Board Version V1.1

Note: These are typical specifications for this display family. Confirm the actual V1.1 board’s power input, logic-level compatibility, pinout, and any additional features before installation.

Pin Configuration and Connection

The common 8-pin ST7735 module uses the following connections:

Pin Function Description
VCC Power Module power input
GND Ground Common ground
SCL / SCK SPI Clock Serial clock input
SDA / MOSI SPI Data Serial data input
RES / RST Reset Display reset
DC / A0 Data/Command Selects command or display data
CS Chip Select Enables the display
LED / BL Backlight Controls the display backlight

The exact pin labels and order may differ between board revisions. Some versions also include a microSD card socket with separate SD-card connections.

Arduino UNO Connection Example

TFT Display Arduino UNO
VCC According to module power specification
GND GND
SCL / SCK D13
SDA / MOSI D11
CS D10
RES / RST D9
DC / A0 D8
LED / BL 3.3V or suitable control pin

Important: The ST7735 controller uses 3.3V logic. Do not assume that every V1.1 board accepts 5V logic simply because its power input is marked 5V. If the board does not include logic-level conversion, use a suitable level shifter when connecting it to a 5V Arduino UNO. Verify the VCC and backlight requirements of your exact module.

Working Principle

The 1.8-inch TFT LCD display operates through a combination of a TFT LCD panel and an ST7735 controller. The microcontroller communicates with the controller using SPI signals.

First, the microcontroller initializes the display by sending configuration commands. These commands set the display orientation, color format, address window, and other operating parameters.

After initialization, the microcontroller sends pixel data through the SPI interface. The ST7735 controller processes the received information and updates the corresponding pixels on the TFT panel.

Each pixel can display a color determined by its RGB values. Using the RGB565 format, color information is represented by 16 bits: 5 bits for red, 6 bits for green, and 5 bits for blue.

The LED backlight illuminates the LCD panel, allowing the displayed content to remain visible under normal lighting conditions.

Software and Library Support

The module can be programmed using common Arduino and embedded development environments.

Recommended libraries:

  • Adafruit GFX Library
  • Adafruit ST7735 and ST7789 Library
  • TFT_eSPI Library

For Arduino IDE, the Adafruit libraries provide convenient functions for drawing text, lines, circles, rectangles, and other graphical elements.

A typical program initializes the display using the appropriate ST7735 initialization setting, configures the SPI pins, and then sends graphics or text commands.

The correct initialization option matters because some 1.8-inch ST7735 modules require a specific color-tab or offset configuration. If the display shows incorrect colors, shifted graphics, or a blank screen, check the initialization settings and wiring.

Applications

Arduino Projects: Display sensor readings, menus, counters, measurement results, and operating status in Arduino-based projects.

ESP32 IoT Devices: Build compact graphical interfaces for Wi-Fi monitoring systems, smart controllers, and connected devices.

Digital Measuring Instruments: Create small voltage meters, temperature monitors, frequency displays, and other measurement interfaces.

Robotics Projects: Display robot operating modes, sensor information, battery status, and control feedback.

Portable Electronic Devices: Integrate the screen into handheld controllers, portable testers, and small monitoring equipment.

DIY Gaming Projects: Develop simple retro-style games, graphical menus, and interactive applications.

Smart Home Systems: Display environmental measurements, device status, and basic control menus.

Educational Projects: Help students learn SPI communication, graphical programming, embedded systems, and microcontroller interfacing.

Advantages

  • Compact size for space-constrained electronic projects.
  • Full-color graphical display capability.
  • 128 × 160 resolution for text and graphics.
  • SPI interface uses relatively few GPIO pins.
  • Compatible with popular microcontroller platforms.
  • Supported by widely used Arduino graphics libraries.
  • Suitable for both educational and practical embedded applications.
  • Allows custom graphical user interfaces instead of fixed character displays.

Limitations and Important Considerations

The 1.8-inch TFT display is designed for compact interfaces, so its small screen size may not be suitable for applications requiring large text or extensive information.

SPI communication requires correct pin configuration and display initialization. Incorrect settings may result in a blank screen, color inversion, or shifted images.

The display controller generally uses 3.3V logic. Direct connection to 5V microcontroller signals can damage a board that does not include level-shifting circuitry.

The screen is not necessarily a touchscreen. A standard ST7735 display module does not provide touch input unless a separate touch controller and touch panel are included.

Finally, the exact voltage requirements and additional features depend on the V1.1 PCB design. Check the board before applying power.

Installation and Usage Tips

  1. Identify the pin labels printed on the module before connecting it.
  2. Confirm whether the board accepts 3.3V only or has a 5V-compatible power circuit.
  3. Use 3.3V logic signals unless the board explicitly includes suitable level conversion.
  4. Connect the SPI clock and MOSI pins to the correct hardware SPI pins of your development board.
  5. Install the Adafruit GFX and Adafruit ST7735 libraries or a compatible alternative.
  6. Select the correct ST7735 initialization option for your display.
  7. Check screen rotation and color settings if the output appears incorrectly.
  8. Use PWM backlight control only when supported by the module’s LED circuit.
  9. Keep the SPI wires short and ensure a common ground between the display and microcontroller.

Why Choose the 1.8 Inch TFT LCD Display 128×160 V1.1?

If you are developing an Arduino project, ESP32-based IoT device, robotics system, or compact electronic instrument, this TFT LCD display offers a practical way to add a colorful graphical interface. Its ST7735 controller, SPI communication, and broad software-library support make it suitable for a wide range of development and prototyping applications.

Instead of limiting your project to basic character-based information, you can create custom menus, graphical indicators, icons, and real-time monitoring screens.

Why Buy from ElectroXBD?

ElectroXBD provides electronic components, robotics parts, development boards, sensors, and project materials for students, engineers, makers, and electronics enthusiasts in Bangladesh.

Whether you are developing a university project, building a prototype, or working on a commercial embedded system, ElectroXBD helps you source the components required for your work.

  • Electronics and robotics components for project development.
  • Components suitable for Arduino and ESP32 applications.
  • Convenient ordering through the ElectroXBD website.
  • Support for students, engineers, and electronics hobbyists.

Order your 1.8 Inch TFT LCD Display 128×160 V1.1 ST7735 from ElectroXBD.

Website: https://electroxbd.com
Contact / WhatsApp: 01600334238
Email: electroxbd@gmail.com
Shop Address: H#1/1, Opposite of RH Chhatrabash, Vodra-Talaimari Road, Rajshahi, Bangladesh.

Frequently Asked Questions (FAQ)

1. What is the resolution of the 1.8-inch TFT LCD display?

The display has a resolution of 128 × 160 pixels, allowing it to show text, graphics, icons, and colorful images.

2. Which controller IC does this TFT LCD module use?

This module is designed around the ST7735 display controller, with ST7735S-compatible variants commonly found in this display family.

3. Can I use this display with Arduino UNO?

Yes. It can be used with Arduino UNO through the SPI interface. However, check the module’s logic-voltage compatibility and use a suitable level shifter if the board does not support 5V logic.

4. Is the 1.8-inch TFT LCD compatible with ESP32?

Yes. The ESP32 supports SPI communication and can control this display using libraries such as TFT_eSPI or Adafruit_ST7735.

5. Does this display support full-color graphics?

Yes. The ST7735 controller commonly supports RGB565 color mode, providing up to 65,536 colors for graphical interfaces and images.

6. Which communication interface does this module use?

It uses SPI (Serial Peripheral Interface), which requires clock, data, chip-select, and data/command signals, along with reset and backlight connections where provided.

7. Can I display sensor readings on this screen?

Yes. You can display temperature, humidity, voltage, current, distance, and other sensor readings by connecting the display to a compatible microcontroller.

8. Does this module support touchscreen functionality?

No. The standard ST7735 TFT LCD module is a display-only device and does not provide touchscreen input.

9. Which Arduino library is suitable for this display?

The Adafruit GFX Library with the Adafruit ST7735 and ST7789 Library is a commonly used option. TFT_eSPI is another popular choice, particularly for ESP32 projects.

10. Where can I buy the 1.8 Inch TFT LCD Display 128×160 V1.1 in Bangladesh?

You can buy the 1.8 Inch TFT LCD Display 128×160 V1.1 ST7735 from ElectroXBD, a trusted electronics components supplier in Bangladesh.

 

Common Questions:

Q: What is the price of 1.8 Inch TFT LCD Display128x160 V1.1 ST7735 in Bangladesh?

A: The latest price of 1.8 Inch TFT LCD Display128x160 V1.1 ST7735 in Bangladesh is 550 BDT.

Q: Where to buy 1.8 Inch TFT LCD Display128x160 V1.1 ST7735 in Bangladesh?

A: You can buy the 1.8 Inch TFT LCD Display128x160 V1.1 ST7735 at the best price from ElectroXBD in Bangladesh.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

FAQs

What payment methods ElectroXBD accepted?
ElectroXBD accepts cash on delivery, bKash, and bank transfers.
Can products be returned or exchanged?
Yes, returns are accepted within 7 days of delivery according to terms & policies.
How long does delivery take?
Delivery generally takes 2-4 business days, depending on the location.
To which locations does ElectroXBD deliver goods?
ElectroXBD delivers orders to all regions across Bangladesh.
Category:

Cart

Cart

Your Cart is Empty

Back To Shop
Continue Shopping
Payment Details
Sub Total ৳ 0