Email: electroxbd@gmail.com
Whatsapp: 01600334238

GW-Instek SFG-1013 3MHz DDS Function Generator

৳ 25,000

  1. Model: GW Instek SFG-1013
  2. Frequency Range: 0.1Hz–3MHz for sine and square waves
  3. Waveforms: Sine, square, triangle and TTL
  4. Maximum Output Amplitude: 10Vp-p into a 50Ω load
  5. Display: Six-digit LED display with voltage indication

Out of stock

GW Instek SFG-1013 Function Generator Price in Bangladesh

The GW Instek SFG-1013 3MHz DDS Function Generator is a laboratory signal source designed to generate electrical waveforms for circuit testing, electronics education, research and product development. It uses Direct Digital Synthesis (DDS) technology with FPGA-based design to provide adjustable-frequency signals for a variety of electronic experiments.

The instrument generates sine, square and triangle waveforms, along with a TTL output for compatible digital circuit applications. Its frequency range reaches 3MHz for sine and square waveforms, while triangle wave generation is specified up to 1MHz. The six-digit LED display helps users monitor the selected frequency, and the SFG-1013 model additionally includes a voltage display.

For university laboratories, electronics technicians and engineering students, the SFG-1013 can serve as a practical signal source when investigating amplifier response, filter behavior, oscillator circuits and other electronic systems.

What Is a DDS Function Generator?

A function generator is an electronic instrument that produces electrical waveforms at selected frequencies and amplitudes. These signals are applied to a circuit under test so that its response can be observed using instruments such as an oscilloscope or multimeter.

Direct Digital Synthesis generates waveforms through digitally controlled signal-generation circuitry. This approach supports precise frequency selection and stable signal output. In the SFG-1013, DDS technology enables the generation of standard waveforms for routine laboratory and electronics testing.

Key Features

  • DDS technology with FPGA-based design
  • Frequency generation up to 3MHz for sine and square waveforms
  • Triangle wave generation up to 1MHz
  • Sine, square, triangle and TTL outputs
  • Frequency resolution up to 0.1Hz
  • Frequency accuracy of ±20ppm
  • Frequency stability of ±20ppm
  • Six-digit LED display
  • Voltage display specific to the SFG-1013 model
  • Output amplitude up to 10Vp-p into a 50Ω load
  • DC offset adjustment
  • Built-in -40dB attenuator
  • Adjustable square-wave duty cycle
  • Nominal 50Ω output impedance
  • Compact benchtop laboratory design
  • Suitable for electronics education and circuit development

Technical Specifications

Parameter Specification
Brand GW Instek
Model SFG-1013
Technology DDS with FPGA-based design
Sine Wave Frequency 0.1Hz–3MHz
Square Wave Frequency 0.1Hz–3MHz
Triangle Wave Frequency 0.1Hz–1MHz
Output Functions Sine, square, triangle, TTL
Frequency Resolution Up to 0.1Hz
Frequency Accuracy ±20ppm
Frequency Stability ±20ppm
Aging ±5ppm/year
Maximum Amplitude 10Vp-p into 50Ω
Output Impedance 50Ω ±10%
Attenuator -40dB ±1dB
DC Offset Approximately ±5V into 50Ω
Square-Wave Duty Control 25%–75%, below 1MHz
Display Six-digit LED with voltage display
Dimensions 251 × 91 × 291mm
Weight Approximately 2.1kg
Standard Accessory GTL-101 test lead, power cord and manual

Specifications are taken from the manufacturer’s SFG-1000 series documentation. The output amplitude and DC offset depend on the specified load and instrument settings.

Working Principle

The SFG-1013 uses Direct Digital Synthesis to generate signals at a selected frequency. The instrument’s internal digital circuitry determines the waveform data, which is converted into an analog output signal and conditioned for the selected waveform and amplitude.

The user selects a waveform, sets the required frequency and adjusts the output level. The signal is then connected to the circuit under test using a suitable test lead.

A sine wave is useful for evaluating frequency response and analog circuits. Square waves are useful for studying switching behavior and digital circuits, while triangle waves can be used to examine amplifier response and waveform-processing circuits. The TTL output provides a logic-level signal for compatible digital experiments.

The DC offset control shifts the waveform relative to ground, while the attenuator reduces output amplitude when a smaller signal is needed.

Applications

1. Electronics Laboratory Experiments

Generate test signals for undergraduate electronics courses and laboratory exercises.

2. Amplifier Testing

Apply known input signals to investigate gain, clipping and frequency response.

3. Filter Circuit Analysis

Test low-pass, high-pass and other filter circuits at different frequencies.

4. Oscilloscope Demonstrations

Display generated waveforms on an oscilloscope to study amplitude, frequency, period and signal shape.

5. Analog Circuit Development

Evaluate oscillators, signal-conditioning stages and other low-frequency analog circuits.

6. Digital Electronics Education

Use square-wave and TTL outputs in compatible logic-circuit experiments.

7. Engineering Research

Provide a controlled waveform source for suitable bench experiments and prototype validation.

8. Technical Training

Demonstrate the relationship between waveform shape, frequency, amplitude and circuit response.

Advantages

Stable frequency generation: The specified ±20ppm accuracy and stability support repeatable laboratory experiments.

Multiple waveforms: Sine, square, triangle and TTL outputs accommodate a range of testing requirements.

Fine frequency adjustment: A resolution of up to 0.1Hz allows detailed frequency selection.

Voltage display: The SFG-1013 includes a voltage display to help monitor output amplitude.

Benchtop convenience: Its compact instrument format suits educational laboratories, repair benches and electronics workstations.

Straightforward operation: Dedicated instrument controls make common signal-generation tasks accessible to students and technicians.

Limitations

  • The maximum sine and square wave frequency is 3MHz, and triangle wave generation is limited to 1MHz.
  • The instrument does not replace an arbitrary waveform generator when user-defined waveform shapes are required.
  • Output amplitude accuracy is specified as ±20% at the maximum position for the SFG-1013, so critical amplitude measurements may require independent verification.
  • Output characteristics depend on load impedance and instrument settings.
  • The SFG-1000 series is listed as discontinued by the manufacturer, so availability, warranty and servicing should be confirmed before purchase.

Installation and Usage Tips

  1. Place the generator on a stable, well-ventilated laboratory bench.
  2. Confirm that the instrument’s mains-voltage configuration matches the available supply.
  3. Select the appropriate waveform before connecting the output to a circuit.
  4. Begin with a low output amplitude when testing an unfamiliar circuit.
  5. Match the output connection and load impedance to the instrument’s specifications.
  6. Use an oscilloscope to verify waveform shape and amplitude when required.
  7. Apply DC offset only when the circuit under test requires it.
  8. Check component voltage limits before applying a test signal.
  9. Use appropriate test leads and avoid shorting the output terminals.
  10. Follow the manufacturer’s manual for setup, operation and maintenance.

Why Choose the GW Instek SFG-1013?

The GW Instek SFG-1013 combines DDS signal generation, multiple standard waveforms, fine frequency adjustment and a voltage display in a dedicated laboratory instrument. It is suitable for educational institutions, electronics engineering laboratories, technicians and developers who need a conventional signal source for routine circuit testing.

Its specifications make it particularly appropriate for low-frequency and moderate-frequency electronics experiments where sine, square, triangle or TTL signals are required.

Because the series is discontinued, buyers should verify the condition of the unit, included accessories, calibration status and warranty arrangements before placing an order.

Why Buy from ElectroXBD?

ElectroXBD — Trusted Source for Reliable Electronic Parts supplies electronic components, test instruments, sensors and development boards for students, engineers, laboratories and electronics professionals in Bangladesh.

We aim to help customers source useful equipment for electronics education, circuit development, measurement and technical projects.

Website: electroxbd.com
Mobile/WhatsApp: 01600334238
Email: electroxbd@gmail.com
Shop Address: H#1/1, Opposite of RH Chhatrabash, Vodra-Talaimari Road, Rajshahi

Frequently Asked Questions (FAQ)

1. What is the GW Instek SFG-1013 used for?

It generates electrical test waveforms for electronics laboratories, amplifier testing, filter analysis, circuit development and engineering education.

2. What is the maximum frequency of the SFG-1013?

It supports sine and square wave frequencies up to 3MHz. Triangle wave generation is specified up to 1MHz.

3. Which waveforms can the SFG-1013 generate?

It generates sine, square, triangle and TTL outputs for compatible test applications.

4. What is the maximum output amplitude?

The specified maximum is 10Vp-p into a 50Ω load. The actual output depends on the selected settings and load.

5. Does the SFG-1013 have a voltage display?

Yes. The SFG-1013 includes a voltage display; this is the distinguishing feature noted by the manufacturer compared with the SFG-1003.

6. What is the frequency resolution?

The manufacturer’s specification lists frequency resolution up to 0.1Hz.

7. Can it be used with an oscilloscope?

Yes. Its generated signals can be connected to a compatible oscilloscope input to observe waveform shape, frequency and amplitude.

8. Is the SFG-1013 still in production?

GW Instek lists the SFG-1000 series as discontinued. Confirm current stock, condition and warranty before ordering.

9. Is the SFG-1013 suitable for university laboratories?

Yes. Its standard waveforms and frequency range make it useful for many basic and intermediate electronics laboratory experiments.

10. Where can I buy the GW Instek SFG-1013 in Bangladesh?

You can contact ElectroXBD, a trusted electronics components and test-equipment supplier in Bangladesh, to check availability and purchasing options.

 

Common Questions:

Q: What is the price of GW-Instek SFG-1013 3MHz DDS Function Generator in Bangladesh?

A: The latest price of GW-Instek SFG-1013 3MHz DDS Function Generator in Bangladesh is 25000 BDT.

Q: Where to buy GW-Instek SFG-1013 3MHz DDS Function Generator in Bangladesh?

A: You can buy the GW-Instek SFG-1013 3MHz DDS Function Generator at the best price from ElectroXBD in Bangladesh.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

FAQs

What payment methods ElectroXBD accepted?
ElectroXBD accepts cash on delivery, bKash, and bank transfers.
Can products be returned or exchanged?
Yes, returns are accepted within 7 days of delivery according to terms & policies.
How long does delivery take?
Delivery generally takes 2-4 business days, depending on the location.
To which locations does ElectroXBD deliver goods?
ElectroXBD delivers orders to all regions across Bangladesh.

Cart

Cart

Your Cart is Empty

Back To Shop
Continue Shopping
Payment Details
Sub Total ৳ 0